DIPHENYL OXIDE-manufacture,factory,supplier from China

(Total 24 Products for DIPHENYL OXIDE)
Products Description of Diphenyl Ether CAS#101-84-8Diphenyl Ether (CAS#101-84-8) is a colorless crystalline solid or liquid with a mild, pleasant aroma. It is characterized by its colorless appearance and melts at a point around 81 °F (27.2 °C). When the temperature exceeds this melting point, it transforms into a colorless liquid. Diphenyl Ether is known for its distinct, strong floral-green, metallic geranium-like scent and is insoluble in water.This chemical is widely used as a heat transfer medium due to its thermal stability and low vapor pressure.
اتصل الآن
Products Description of Dibenzoylmethane CAS#120-46-71,3-diphenyl-1,3-propanedione is commonly known as dibenzoylmethane.
اتصل الآن
Products Description of Magnesium oxide CAS#1309-48-4Magnesium oxide is commonly known as magnesia, also known as magnesium oxide. It is a typical alkaline earth metal oxide with the chemical formula MgO. It is a white powder with a melting point of 2852℃, a boiling point of 3600℃ and a relative density of 3.58 (25℃). It is soluble in acid and ammonium salt solutions. It reacts slowly with water to form magnesium hydroxide. It can be dissolved in a carbon dioxide aqueous solution to form magnesium bicarbonate.
اتصل الآن
Products Description of Cadmium oxide CAS#1306-19-0Cadmium oxide is an oxide of cadmium with the molecular formula CdO, which is carcinogenic. Cadmium oxide can dissolve in acid to form Cd[H2O]62+; it can also dissolve in alkali to form [Cd(OH)4]2??.Cadmium oxide Chemical PropertiesMelting point 900°CBoiling point 1385 °Cdensity 8.15 g/mL at 25 °C(lit.)storage temp. Store below +30°C.solubility 0.0021g/lform powdercolor brownSpecific Gravity8.15OdorOdorlessPH9-10 (H2O)(aqueous suspension)Water Solubility insoluble.
اتصل الآن
Products Description of Direct Ferric oxide CAS# 1309-37-1Iron oxides are produced synthetically and consist essentially of anhydrous and/or hydrated iron oxides. The range of hues includesyellows, reds, browns and blacks. Food quality iron oxides are primarily distinguished from technical grades by the comparatively low levels of contamination by other metals. This is achieved by the selection and control of the source of iron and/or by the extent of chemical purification during the manufacturing process.
اتصل الآن
Aluminum Oxide CAS#1344-28-1 The oxide of aluminum is Al2O3. The natural crystalline mineral is called corundum, but the synthetic crystals used for abrasives are designated usually as aluminum oxide or marketed under trade names. For other uses and as a powder, it is generally called alumina.
اتصل الآن
Products Description of Cupric oxide CAS#1317-38-0Copper oxide is an inorganic substance with the chemical formula CuO. It is a black oxide of copper, slightly amphoteric and slightly hygroscopic. Insoluble in water, easily soluble in acid, stable to heat, and decomposes into oxygen at high temperatures. It can be reduced to metallic copper by introducing hydrogen or carbon monoxide at high temperature. Copper oxide is heated in Chemicalbook air and releases oxygen at about 1050°C and is reduced to cuprous oxide.
اتصل الآن
Products Description of Lead Oxide CAS#1317-36-8Lead oxide is an inorganic substance with the chemical formula PbO. It is a yellow crystalline powder. It is insoluble in water and ethanol, but soluble in nitric acid, acetic acid, and hot alkali solution. It is mainly used as a pigment, metallurgical flux, paint drier, rubber vulcanization accelerator, pesticide, etc.On October 27, 2017, the World Health Organization's International Agency for Research on Cancer published a preliminary list of carcinogens for reference.
اتصل الآن
Products Description of Cupric oxide CAS#20427-59-2Chemical formula Cu(OH)2. Molecular weight 97.56. Blue to blue-green gel or light blue crystalline powder, toxic. Relative density 3.37. Color darkens at 60-80℃. Insoluble in cold water, decomposes into copper oxide in hot water, dissolves in acid to form divalent copper salt, dissolves in excess concentrated alkali to form tetrahydroxy cuprate, dissolves in concentrated ammonia or potassium cyanide solution to form dark blue tetraamminecopper(II) dihydroxide solution or colorless potassium tetracyanocuprate(II) solution.
اتصل الآن
Products Description of 4-Methylmorpholine N-oxide CAS#7529-22-8N-methylmorpholine oxide (NMMO) solvent is a special excellent solvent with extremely strong solubility for cellulose. It is a crystalline solid or liquid at room temperature, non-toxic, weakly alkaline, and highly hygroscopic. Each molecule can combine with multiple water molecules. It is easy to produce a color change reaction at 120°C, and an overheating reaction at 175°C and is easy to gasify and decompose.
اتصل الآن
Products Description of Chromium(VI) oxide CAS#1333-82-0Chromium trioxide is an inorganic compound with the chemical formula CrO3. It is a dark red or dark purple crystalline powder. It is soluble in water, sulfuric acid, nitric acid, ethanol, ether, acetic acid, and acetone. It is mainly used in electroplating industry, pharmaceutical industry, printing industry, tanning and fabric mordant dyeing.On October 27, 2017, the World Health Organization's International Agency for Research on Cancer published a preliminary list of carcinogens for reference.
اتصل الآن
Products Description of Methylcyclopentadienyl manganese tricarbonyl CAS#12108-13-3Methylcyclopentadienyl manganese tricarbonyl, a metallic manganese compound. Combustible, highly toxic, decomposes into toxic manganese oxide fumes in fires.
اتصل الآن
Products Description of Bisphenol-A bis CAS#5945-33-5Bisphenol A Bis(diphenyl phosphate) is a flame retardant.
اتصل الآن
Products Description of Lantanium Nitrate CAS#10277-43-7Lanthanum nitrate hexahydrate is a colorless crystalline solid with a distinctive nitrate odor. - It is relatively stable at room temperature, but can decompose when heated to produce toxic nitrous oxide gas.
اتصل الآن
Products Description of 2,2,6,6-Tetramethylpiperidinooxy CAS#2564-83-22,2,6,6-Tetramethylpiperidinyl oxide, abbreviated as TEMPO, is a piperidine-type nitrogen oxide free radical. TEMPO is an orange-red, easily sublimable crystal or liquid, and is easily soluble in solvents such as water, ethanol, and benzene.
اتصل الآن
Products Description of Direct Pigment Yellow 42 CAS#51274-00-1Pigment yellow 42, also known as Yellow Iron oxide is a yellow powder in the form of an alkaline oxide with comparatively stable chemical properties. It is is insoluble in water and alcohol, slightly soluble in acids but completely dissolves in concentrated hydrochloric acid. When heated to 80℃, it loses water and converts to red ferric oxide. It is used in coating, printing ink and paint, and also as a coloring agent for building material, rubber and paper-making.
اتصل الآن
Products Description of Bismuth trioxide CAS#1304-76-3Yellow monoclinic crystals. Soluble in acid, insoluble in water and alkali. Can be reduced by carbon and hydrogen. Made by heating and decomposing bismuth nitrate. Used to make metallic bismuth, catalysts and bismuth oxide superconductors.Bismuth oxide is also known as "bismuth trioxide". Pure products include α-type, β-type and δ-type. α-type is yellow monoclinic crystal with a relative density of 8.9 and a melting point of 825℃. It is soluble in acid but insoluble in water and alkali.
اتصل الآن
Products Description of Diphenylacetonitrile CAS#86-29-3The molecular formula of diphenyl acetonitrile is C14H11N, and its melting point is 71-73°C. Boiling point 181 °C (12 mmHg). Flash point 120 °C. WATER SOLUBLE INSOLUBLE. Used as intermediates in organic synthesis.
اتصل الآن
Products Description of Tetrahydropyran CAS#142-68-7Tetrahydropyran, also known as oxadiazine, is a six-membered oxygen-containing saturated heterocyclic ring. It is a colorless, flammable liquid at room temperature with a special smell. It is miscible in water, ethanol, ether, and other organic solvents. It generates explosive organic peroxides under light. It is prepared by hydrogenation of dihydropyran in the presence of Raney nickel or reaction of 5-dibromopentane and water in the presence of zinc oxide.
اتصل الآن
Products Description of CREMOPHOR (R) A25 CAS#68439-49-6CETETH25 is a nonionic emulsifier obtained by adding natural saturated fatty alcohol and ethylene oxide. CETETH25 (HLB15-17) is an oil-in-water (O/W) emulsifier. When used together with CETETH6, it forms a pair of complementary emulsifiers. The emulsifier pair has a small amount of use and a strong emulsification ability. The prepared emulsion products have high stability and bright appearance. It can tolerate a certain degree of inorganic salts and extreme pH conditions.
اتصل الآن
Products Description of LDAO CAS#1643-20-5This product is colorless or light yellow transparent liquid, with a relative density of 0.98 at 20°C. Easily soluble in water and polar organic solvents, slightly soluble in non-polar organic solvents and showing non-ionic or cationic properties in aqueous solutions. When the pH value is <7, it is cationic. Amine oxide itself is an excellent detergent and can produce stable and rich foam.
اتصل الآن
Products Description of Trimanganese tetraoxide CAS#1317-35-7Manganese tetraoxide is a black tetragonal crystal, also known as manganese pyroxene, black manganese ore, and active manganese oxide. It is calcined into crystals and belongs to the spinel class. It is an important industrial raw material.Manganese tetraoxide is mainly used in the electronics industry and is a raw material for producing soft ferrites. Soft ferrites are made by sintering and molding manganese, zinc, and iron oxides in a certain ratio.
اتصل الآن
Products Description of Dodecylamine CAS#124-22-1Dodecyl primary amine is also known as 1-aminododecane, laurylamine, and dodecylamine. It is colorless or white crystal. This product is weakly alkaline and can form salts with inorganic or organic acids. Can be quaternized. Reacts with ethylene oxide and can be acetylated. Chemicalbook can be added to unsaturated hydrocarbons. This product can be oxidized with peroxide. Reacts with halogenated carboxylic acids to generate amphoteric compounds. Reacts with carboxylic acid chloride to generate amides.
اتصل الآن
Products Description of Lead monoxide CAS#1317-36-8Lead oxide is an inorganic substance with the chemical formula PbO. It is a yellow crystalline powder, insoluble in water, insoluble in ethanol, soluble in nitric acid, acetic acid, and hot alkali. It is mainly used as a pigment, metallurgical flux, and paint drier.
اتصل الآن
Relate News
What is Sodium Cocoyl Isethionate?Sodium cocoyl isethionate is a fine white powder extracted from coconut oil. It’s a sodium salt known to be mild on the skin. That the process involved mixing a natural sulfonic acid called hydroxyethyl sulfonic acid with fatty acids naturally found in coconut oil. Most commonly, you will find this ingredient on the back of shampoo, shower gel, detergent and soap bar because it is considered a surfactant.Surfactants are used as cleaners because they mix well with oil and water.
Sodium Lauryl Sulfate (SLS)Sodium Lauryl Sulfate (CAS No.: 751-21-3), is a white or light yellow slightly sticky substance, which is often used in the detergent and textile industries in industry. It is an anionic surfactant.
lycopene: dark red powder, has the unique smell and taste of lycopene.Lycopene (CAS No.: 502-65-8), dark red powder, has the unique smell and taste of lycopene. The lycopene produced by microbial fermentation mainly uses fermented substrates such as corn steep liquor, soybean meal and starch as the medium, and uses Blake Sleatrispora as the strain. After fermentation, filtration, drying, extraction, crystallization and Manufactured by refining and other processes.The main functions of lycopene are as follows:1. Anti-oxidation, delay aging;2. Improve the body’s immunity;3.
Evening primrose (Eveningprimrose) is a willow leaf vegetable native to North America. It gets its name because its flowers only bloom at night. Its roots, stems and leaves are often used as medicine by European nobles, so it is also known as the emperor’s panacea.Modern research has found that evening primrose oil extracted from evening primrose seeds is rich in GLA (gamma-linolenic acid). GLA is an unsaturated fatty acid, which is an important component of human cell membranes.
What is Cornmint Oil?Cornmint oil is a colorless or light yellow clear liquid. It has a special refreshing fragrance, which is pungent at the beginning and cool afterwards. After long-term storage, the color becomes darker. It is often used to repel mosquitoes and relieve physical fatigue.Legend has it that the original name of mint comes from Greek mythology. Pluto Hades fell in love with the beautiful Elf Mansi, and Pluto’s wife Persephane was very jealous.
Camphor oil is one of the coloring oils used in glaze colors. Made from camphor resin. Light yellow, volatile, with a strong camphor smell. “Ceramic Color Painting”: “Use it to expand the color when painting new colors, it is easy to develop the oil, the brush is loose, and it dries quickly after painting. Pastel is rarely used, only used for freehand color expansion. Sometimes It is also used to develop dry pens, or to wipe off the residue that has consolidated in the dish, or to wipe off the dried waste line on the screen.
Breaking News: Innovative Advancement in Sodium Sulfur BatteriesResearchers at Osaka Metropolitan University have achieved a significant breakthrough in the development of all-solid-state sodium batteries, a promising alternative to lithium-ion batteries for next-generation energy storage systems.
Glycerin: A Versatile Compound with Numerous ApplicationsGlycerin, also known as glycerol, is a simple polyol compound with a sweet taste and syrupy texture. It is widely used in various industries, including cosmetics, pharmaceuticals, and food. Due to its unique properties, such as being hygroscopic (attracting water) and non-toxic, glycerin has become an indispensable ingredient in many products.Glycerin in CosmeticsMoisturizer: Glycerin is one of the most effective humectants, drawing moisture from the air and into the skin.
Citric Acid Anhydrous CAS#77-92-9: Industry News and ApplicationsCitric Acid Anhydrous, with the chemical abstract service number 77-92-9, is a multifunctional organic acid that has gained significant attention in various industries. Here's a curated overview of the latest news and developments surrounding Citric Acid Anhydrous:Industry Applications: Citric Acid Anhydrous is recognized for its diverse applications across industries.
Tannic acid belongs to hydrolyzed tannins, which can be hydrolyzed to acid and glucose. It is one of the earliest studied tannins and has strong biological and pharmacological activities. Tannic acid is mainly rich in plants such as Chinese five seeds, Turkish seeds, tara pods, pomegranates, sumac leaves, sumac, and witch hazel trees.
x

تم الإرسال بنجاح

سنتواصل معك بأقرب وقت ممكن

يغلق